Save Big On Your Energy Bills with New Insulation

Experience superior insulation solutions in Hernando County, FL with our specialized insulation services.

Request Your Free Estimate Today!

    There's No Heat We Can't Beat


    At Joe Blows Insulation we provide insulation services to all of Hernando County, FL including the cities and town listed below:

    Choosing the right type of insulation in Hernando County, FL can be confusing. Let’s take a look at the areas in a home that are generally insulated, the different types of insulation and their respective R-values, and the type of equipment that professional insulation contractors use.

    Spray foam Insulation
    Spray foam Insulation

    Which areas in a Home Should be Insulated?

    Installing insulation in Hernando County, FL in various areas of a home is crucial for maintaining comfort, energy efficiency, and indoor air quality. Different parts of a home have different insulation needs based on factors like climate, building design, and usage. Here are the key areas that should be insulated:

    The attic is one of the most important areas to insulate. Heat tends to rise, so effective attic insulation helps prevent warm air from escaping through the roof during colder months and keeps the home cooler in warmer months.

    Exterior walls should be insulated to reduce heat loss in winter and heat gain in summer. Insulating interior walls between conditioned and unconditioned spaces can help with temperature control and soundproofing.

    Crawl space insulation and basement insulation helps prevent cold air from entering the home from below. It can also reduce moisture issues and improve overall comfort.

    Insulating floors above unconditioned spaces like crawl spaces or garages can prevent heat loss and make those living spaces more comfortable.

    Insulating the roof and ceiling areas, especially in cathedral ceilings or rooms with attic spaces, helps regulate indoor temperatures and prevent heat gain from the sun.

    While not traditional insulation, sealing gaps around doors and windows using weather-stripping and caulk is crucial for preventing drafts and air leakage.

    Insulating HVAC ducts and hot water pipes can help prevent heat loss during distribution, improving energy efficiency and comfort.

    If the garage is attached to the house, insulating the walls and ceiling can help maintain a consistent indoor temperature and minimize the transfer of outdoor heat or cold.


    Wall insulation, especially in basements, helps maintain a comfortable indoor environment and prevents moisture intrusion.

    Insulation can also be used for soundproofing between rooms, floors, and walls to reduce noise transmission.


    It’s important to note that different insulation materials and methods may be appropriate for different areas of the home. The insulation needs also depend on the climate and local building codes. Working with a professional insulation contractor in Hernando County, FL can help you determine the best insulation strategy for your home and maximize energy efficiency and comfort.

    We Provide Quality Insulation Services

    What is R-value?

    The R-value is a measure of a material’s thermal resistance, indicating how effective it is at preventing the transfer of heat. A higher R-value indicates better insulation performance. Different insulation materials have different R-values due to variations in composition, density, and other factors. Here’s an explanation of the R-values of some common insulation materials:

    Batt or blanket fiberglass insulation typically has an R-value ranging from R-2.9 to R-3.8 per inch of thickness. Higher-density fiberglass can have slightly higher R-values. Loose-fill fiberglass insulation generally has an R-value of about R-2.2 to R-2.7 per inch.

    Similar to fiberglass, mineral wool (rock wool or slag wool) insulation has R-values ranging from R-3.0 to R-4.3 per inch for batts or blankets. Loose-fill mineral wool insulation has an R-value of about R-3.0 to R-3.3 per inch.

    Loose-fill cellulose insulation typically has an R-value of around R-3.2 to R-3.8 per inch. The R-value of sprayed-in cellulose insulation can be slightly higher, around R-3.6 to R-3.8 per inch.

    Extruded polystyrene (XPS) rigid foam insulation has an R-value of about R-5.0 to R-5.5 per inch. Expanded polystyrene (EPS) rigid foam insulation typically has an R-value of around R-3.6 to R-4.2 per inch. Polyisocyanurate (polyiso) rigid foam insulation can have an R-value of about R-5.6 to R-8.0 per inch.

    Reflective insulation materials, like radiant barriers, work differently. They reflect radiant heat and don’t have a traditional R-value. They are often used in combination with other insulation types to enhance performance.

    It’s important to note that the overall effectiveness of insulation depends not only on the R-value of the material but also on factors like installation quality, proper sealing, and moisture control. When selecting insulation, consider the climate of your region and your specific energy efficiency needs. A higher R-value might be more important in colder climates, while other factors like air sealing could also influence your choice.

    Would You Like Lower Energy Bills?

    Cut Energy Costs with Our Professional Insulation Services

    Equipment Used by Insulation Contractors

    Insulation contractors in Hernando County, FL use a variety of tools and equipment to effectively install insulation materials and ensure the best results. The specific tools used may vary depending on the type of insulation being installed and the method of installation. Here are some common tools used by insulation contractors:

    Personal protective equipment (PPE) including gloves, safety goggles, coveralls, and respirators to protect against hazards and airborne particles.

    Utility knives and scissors for cutting insulation materials to the required size and shape.

    Staple guns or nail guns for securing insulation materials to surfaces such as studs, joists, or sheathing.

    For blown-in insulation materials, contractors use specialized machines that mix and blow insulation fibers or particles into cavities. These machines help ensure even distribution and proper coverage.

    Tape measures, rulers, straight edges, and squares for accurately measuring and cutting insulation materials like rigid foam board insulation to fit specific areas.

    Caulking guns and sealants to create airtight seals around gaps, joints, and penetrations.

    Nails, screws, staples, and adhesive tapes to secure insulation materials in place.

    High-powered vacuums with HEPA filters for removing old or damaged insulation materials such as cellulose insulation, especially in retrofit or removal projects.

    Various types of ladders, scaffolding, and platforms to access hard-to-reach areas during installation.


    It’s important to note that different insulation materials and methods may be appropriate for different areas of the home. The insulation needs also depend on the climate and local building codes. Working with a professional insulation contractor in Hernando County, FL can help you determine the best insulation strategy for your home and maximize energy efficiency and comfort.

    Contact Us

    Are you looking for a professional to install insulation? At Joe Blows Insulation we offer inspection and insulation installation services in Hernando County, FL. Our team can answer any related questions that you may.

    What Our Clients Are Saying:

    joe-blows-character Spray foam Insulation

    Want to save on your energy bills?